- EASY TO INSTALL
- EASY TO OPERATE
- EASY TO MAINTAIN
- EASY TO ADD HEAT
DESCRIPTION
The Slickster Limited Finishing Prep Station draws fresh air
from the cleaner upper levels of the shop through a pressurization
fan. This air is forced down into the prep station through a
filter bank located in the ceiling near the entry. The air is
drawn through the prep station work area into a filtered exhaust
plenum at the opposite end and exhausted out to the atmosphere
through the exhaust fan and stack.
This design allows for easy addition
of a heated air makeup unit.
LIGHTING FEATURES
Bright full booth illumination is provided by eight
(8) four-tube, 48" long, 32-watt, fluorescent
light fixtures in the ceiling panels. Each is sealed
behind clear tempered safety glass. All fixtures are
UL listed and approved for their intended use and
placement. The light tubes are not furnished with
the fixtures.
CONSTRUCTION FEATURES AND QUALITY STANDARDS
The Hanging Intake Plenum and Exhaust Plenum
Wall will be fabricated with 18-gauge galvanized
steel panels; flanged for strength and pre-punched
for easy nut and bolt assembly. The intake plenum
may be suspended with a maximum of 10' tall
clearance or as low as 7' tall clearance. The actual
installed height is required to order the Goff's™
Curtain walls.
Intake air is supplied by one (1) 18" diameter tubeaxial fan
with a 1-1/2 HP, three-phase motor. Exhaust is provided by one
(1) 18" diameter tubeaxial fan with a 1-1/2 HP, three-phase
motor.
Panels, assembly hardware, filters, and sealants needed for
mechanical installation are included. The threaded rod for suspending
the intake plenum is not supplied by us. Goff's™ Curtain walls,
intake and exhaust stack, control panel, and other electrical
components may be purchased separately.
Our Spray Booth’s Slickster Limited Finishing Prep Station
complies with NFPA 33 regulations pertaining to limited finishing
workstations. Optional listing is available on this product.
Our Spray Booth products comply with all OSHA and NFPA
regulations.
Specifications
| Model # |
Int. Dimen. |
Ext. Dimen. |
Nominal Clear Entry |
Lights
Open |
Air
Flow
SCFM |
Fan Spec. |
Filters |
| Width |
Height |
Dia. |
HP |
Int. |
Exh. |
| SPS-26-PSB |
14' x 10' x 24' |
14'4" x 12'2" x 26'2" |
14' |
10' |
10 |
4000 |
18" |
1-1/2 |
12 |
12 |
Back to Paint Booths Index |