The Automotive Shop Equipment Megastore!

The most complete line of Automotive Equipment on the Planet!

Information Request

The selection that solves your automotive equipment needs! Model Text Tips

Economy Without Sacrificing Quality All Bolt Together Design

AmPro Economaster Spray Booths are constructed of quality materials and manufactured to exacting standards. Designed for extended service and high production requirements, while providing the correct environment to produce the finest quality finishes. Cross Draft Spray Booths are designed to efficiently remove airborne paint particles and harmful vapor (overspray) from the working area of the spray booth. Air moves horizontally through the booth from the front to the rear. Fresh air enters through air inlet filters mounted in the front product entrance doors and exhausts through the arrestor filter media in the rear. Units are designed to conform to NFPA and OSHA standards and regulations.

• Construction Booths are constructed of 18 gauge G90 grade galvanized sheet metal panels. Panels are manufactured with 2" rolled flanges and 1/2" back rolled flanged and punched on 6" centers for bolt together assembly using 5/16 in. hex head bolts and nuts zinc plated Grade 5. Panels are manufactured using automated CNC machinery for size and hole accuracy. Standard tube acrylic caulking is supplied to seal seams. • Exhaust System Exhaust system uses a 30" tubeaxial fan with TEFC electric motor, 208/230/460 volt 3 phase (single phase optional). Fans are designed with a streamlined belt tunnel and non sparking blades. Fan housing is iron phosphate processed steel with an acrylic epoxy paint finish. A cast iron sheave is factory installed. AmPro's exclusive 20" x 20" x 2" filter frame assemblies with integral mounted filter grids are supplied. • Doors Cross Draft models come with TRI FOLD Door System. Doors are 9' wide x 8' high and provide both product entrance/exit and access door. Doors are filtered design with 20" x 25" air inlet filters. Heavy duty hinges and explosion relief latches are included along with a welded angle iron door frame painted battleship gray. Adhesive foam seals and rubber door sweeps are provided to seal booth from contaminates. Solid back model booths of 26' and over have the addition of a 36" x 84" access door to conform to national regulations.

• Filtration The 20" x 20" exhaust filters trap the airborne paint particles (overspray) and allow the harmful vapor to be exhausted to exterior atmosphere. The inexpensive dry filters are disposable as standard industrial waste by most localities. (Check your local codes for regulations regarding filter disposal.) Air input filtration is mounted in the doors using 20" x25" x 1" air filters, self sealing design. • Lighting Booths are equipped with side & roof mounted 40 watt 4 tube fluorescent lighting fixtures (less tubes). Additional lighting can be added as requested. Booth lighting systems are designed to conform to NFPA-33 regulations for spray booth application. All lighting systems are UL listed. • Accessories & Optional Equipment View windows 23" x 47" in doors. Electrical control panels. Optional access door/s. Safety systems Exhaust stackwork. 20" x 20" x exhaust filter assembly. (replaces roll filter media system).

Why Purchase An AmPro Economaster Spray Booth? • All Bolt Together Design. • Tri Fold Filter Doors • Constructed Of G90 Grade Galvanized Steel Panels • Tubeaxial Exhaust Fan • 6 Lights

Automotive Booth and Air Flow
Information