The Automotive Shop Equipment Megastore!

The most complete line of Automotive Equipment on the Planet!
Information
Request
The selection that solves your automotive equipment needs!
Model Text Tips

Back to: Paint & Auto Body Index.

Custom Designed Models Are Available
To Fit Your Specific Requirements.
Bolt Together Assembly
AmPro Shinemaster Spray Booths are constructed of quality materials and manufactured to exacting standards. Designed for extended service and high production requirements, while providing the correct environment to produce the finest quality finishes.

Cross Draft Spray Booths are designed to efficiently remove airborne paint particles and harmful vapor (overspray) from the working area of the spray booth. The cross draft design flows air horizontally. Entering through air inlet filters mounted in the front filter doors, the air flows across the surface of the vehicle and exits through the rear exhaust filters. Bridge type air input and exhaust chambers are available as optional equipment.		 Shinemaster Cross Draft Truck/Bus Spray Booth

• Construction
Booths are constructed of 18 gauge G90 grade galvanized sheet metal panels. Panels are manufactured with 2" rolled flanges and 1/2" back rolled flanged and punched on 6" centers for bolt together assembly using s/16 in. hex head bolts and nuts zinc plated Grade 5. Panels are manufactured using automated CNC machinery for size and hole accuracy. Standard tube acrylic caulking is supplied to seal seams. Galvanized T-bar structural supports provide for booth stability and rigidity.

• Filtration
The 20" x 20" x 2" exhaust filters trap the airborne paint particles (overspray) and allow the harmful vapor to be exhausted to exterior atmosphere. The inexpensive dry filters (arrestors) are disposable as standard industrial waste by most localities. (Check your local codes for regulations regarding filter disposal.) Air input filtration is mounted with the front entrance filter doors and contain 20" x 25' x 1" or 20" x 50" x 1" air inlet filters. An optional bridge type air inlet plenum can be installed when using an air make up system.

• Lighting
Booths are equipped with hip roof and side mounted 40 watt 4 tube 4 ft. fluorescent lighting fixtures (less tubes). Lighting is mounted horizontally for exceptional illumination. Booth lighting systems are designed to conform to NFPA-33 regulations for spray booth applications. All lighting is UL and/or ETL listed.

  • Doors
Cross Draft Spray Booths come standard with swing product entrance/exit doors and access door. Optional bi-fold doors and view windows are available. All doors are constructed of heavy gauge welded steel tubing - painted, with 18 gauge G90 grade galvanized sheet metal skin. Welded steel door frames with heavy duty hinges and rubber door seals and sweeps are provided. All doors use Brixon latches for a positive safety latch.

• Exhaust System
Exhaust system uses low dBA. tubeaxial exhaust fans, complete with TEFC electric motor, 208/230/460 volt 3 phase (single phase motor optional). Fans are designed with a streamlined belt tunnel and non sparking blades. Fan housing is iron phosphate processed steel with an acrylic epoxy paint finish. A cast iron sheave is factory installed.
AmPro's exclusive 20" x 20" x 2" filter frame assemblies with integral mounted filter grids are supplied.

• Accessories & Optional Equipment

  • Bi-fold doors.
  • View Windows.
  • Electric control panels and kits.
  • Safety Systems.
  • Air make up systems.
  • SPRAY/CURE packages.
  • Exhaust stackwork.
  • Roll up doors can be adapted.

Automotive Booth and Air Flow
Information

Back to: Paint & Auto Body Index.

Auto Lifts • Tire Changers • Wheel Balancers • Brake Lathes • Pipe Benders • Paint Booths
Frame Machines • HVAC • Service Jacks • AC Service • Site Map • Helpful Resources • Links

Last Updated:

Copyright © 2004 America's Pride Inc. - Over 5,000 products ready for shipping.