Specifications
B200 & B700
Waste Oil Burners

  B200 B700
Fuel Consumption
Gallons per Hour (GPH) .84 to 3.6 4.6 to 7.2
BTUH
Input (x100) 120 to 450 650 to 1.1M
Dimensions
Height 14" 19"
Width 18" 24"
Length 16" 25"
Compressed Air Requirements
CFM 2 2
PSIG 30 40
Air Connection
Fitting Size to Air Regulator 1/4 NPT 1/4 NPT
Flame
Length - Changes w/ Oil Pressure (Avg) 2.5' to 5' 5' to 7'
Diameter - Approximate 12" 18"
Air Tube
Diameter - Enters Into Combustion Chamber 4" 5"
Length - Inside of Combustion Chamber 1-5/8" 4-1/2"
Convenience Controls
Additional Attempts to Establish Flame Yes
Automatic Nozzle Clean-Out Yes
Hour Meter Yes
Dirty Filter Indicator Yes
Switch to Test Spark Ignition Yes
Electrical
Total Current Draw (amps) 10 16
Volts 120
Required Circuit Protection (amps)* 20
Frequency - Hz 60
Thermostat Voltage ** 120
Ignition Transformer, 23 ma secondary, continuous duty shielded transformer 10,000V
Intermittent Spark Ignition (10 seconds) Yes
Burner Motor
Horsepower 1/5 1/3
RPM 3,450
Fuel Pump
Suntec Model A2RA Waste Oil Pump Yes
Oil Nozzle
Delavan Aspirated Nozzle (#30609) 3.1 to 5 8 to 11
Pump Connection
Fitting Size to Pump 1/4 NPT
Equipment Included
Vapor Elimination from Oil Yes
Filtration After Oil Heating Yes
Heater Switch Standard
Line Voltage Thermostat ** Standard
Floating Oil Pickup Assembly Included
Check Valve Included
Return Flow Vent System Included
Installation & Maintenance Manual Included
Optional Equipment: Boost Pump & Draft Inducer
Shipping Weight
Burner Packaged Separately in Box 52 lbs. 72 lbs.
Warranty: One year Full Warranty on Parts (Not Labor)
* Not Included In Burner Package
**Not Applicable to Boiler


The most complete line of Automotive Shop Equipment on the Planet!





2 Post Lifts, Parking Lifts, Wheel Service Equipment and Much, Much More!

Ask us about our Up to Full Year No Interest Program (Qualified Credit).