To place order go to Product Catalog, fax or mail us order form or lease application, or use our contact information.

Back to: Recycling/Waste Management or Waste Oil Heaters Index. Printer Friendly Version

Waste Oil Fueled Evaporators Evaporators are used for a number of processes to separate liquids having different specific gravities and to remove water from solutions to concentrate the remaining components for reduction of disposal costs. The INOV8 evaporator goes one step further - it uses the oils separated from the water to fuel the evaporator. Wastes generated from machine coolants, mop water, wash solutions, process waters and/or rinse solutions can be evaporated away leavings oils and solvents, which are then used to fuel the burner that heats the water in the evaporator. These are perfect systems for environmentally conscious companies. Why INOV8? Stack Emissions Return on Investment Calculator Typical Installations INOV8 now offers four sizes of waste oil fueled evaporators having capacities of 15 to 60 gallons of water evaporated per hour. There are numerous evaporator manufacturers but none that offer one fueled by waste oils. There has been a huge increase in demand for evaporators (natural gas, fuel oil and electricity) because of increasing environmental restrictions and disposal costs. For example many states are adopting regulations that prohibit the dumping of wastewaters that previously were allowed in city sewer systems. Waters used for washing vehicles, floors, and equipment and for other cleaning purposes are just some examples. Without an evaporator this water must be collected, stored in barrels and taken by waste collection companies that charge high disposal fees. There is a strong desire to reduce government bureaucracies that infiltrate our businesses and this product provides that opportunity. Evaporate Up To 60 Gallons Per Hour We are the leaders in alternative fuel burners Diesel fuel, crankcase oil, and combustible coolants and more can be used to fuel our exclusive waste oil evaporators. There are four standard sizes of evaporators - 10,20,40 and 60 gallons per hour. Custom orders for larger sizes are available. The burners are registered in Europe with the CE(#3884-97) label and are EPA approved. Evaporator Standard Specifications & Options Burner INOV8 Model B200 Evaporation Rate Up to 60 Gallons per Hour Tank Material 10 gauge - 304 stainless steel Combustion Chamber Material 10 gauge - 304 stainless steel Tank Capacity (Gallons) 150 - 500 Outer Shell Material 18 gauge mild steel, powder coat paint Tank Bottom Design V shaped to ensure sludge removal Tank Insulation 4" of single fiberglass Vent Provisions for double wall 8" stack Clean Out Port Full access for combustion & evaporator areas Inlet Port 3/4" NPT with fill pipe Electrical 120 volt, 20 amp service Shipping Weight 800 - 3000 lbs. Warranty One year Options Exhaust Blower 1600 CFM @ 1" SP centrifugal impeller blower wheel Oil Skimmer for Corrosive Waste 316L stainless steel construction or AL6-XN Custom Sizes Upon request

Back to Top

Auto Lifts • Tire Changers • Wheel Balancers • Brake Lathes • Pipe Benders • Paint Booths
Frame Machines • HVAC • Service Jacks • AC Service • Site Map • Helpful Resources • Links