Bay space utilization, under vehicle access, mobility and lifting capacity (set of 4 WE-18 72,000lbs.) are the key factors when choosing a WHEEL ENGAGING MOBILE LIFT. With one set of lifts multiple vehicles can be raised and set onto heavy duty high jack stands allowing the servicing of several vehicles. WE-18 MEETS THE PROVISIONS OF ALI/ETL LIFT CERTIFICATION. THIS PROGRAM INCLUDES ANSI/ALIALCTV-1998 UL201-1997 BUILT IN THE U.S. BUILT TO LAST ... Raising the Standards THE MOST REVOLUTIONARY LIFT ON THE MARKET!
- The ALM WE-18 Wheel Engaging Mobile Lift is designed with you in mind. From it's portability, lifting capacity and time, (60 seconds full rise - fastest in the industry) your needs as a service provider to your customers, fleet or municipality are addressed with this revolutionary lift. The WE-18 is certified by ETL, a Nationally Recognized Testing Laboratory, to meet the requirements of ANSI/ALI ALCTV-1998, UL 201 -1997 and bears the ALI/ETL label of compliance for US & Canada.
- THE WE-18 IS FABRICATED, MANUFACTURED AND ASSEMBLED IN THE US. The lifting mechanism in each column is a hydraulic cylinder with dual locking systems continuously engaged. Each lifting column has an infinitely variable working height. Minimal up/down movement is possible from any intermediate position, from any column. All raise/lowering operations are 1 hand, 1 button (push & hold). Raising the column to release locks before lowering is not required with the WE-18.
- The WE-18 is SAFE, DURABLE AND MAINTAINABLE featuring electrical components manufactured by Square D and Allen-Bradley.
- The WE-18 is suitable for indoor or outdoor operation and employed with MJS-18 HEAVY DUTY JACK STANDS, capable of multiple vehicles in multiple bays eliminating the need for inground lifts or pits. When not in use, the lift is easily stored out of the way of the service bay leaving it open and unencumbered.
- FOLD DOWN HANDLE DURING SERVICE
CAPACITY 18,000 Ibs. per column36,000 Ibs. per pair72,000 Ibs. per set of 4108,000 Ibs. per set of 6 POWER REQUIREMENTS 460V/230V/208V 3 PH 60 HZ380V/190V 3 PH 50 HZ230V/208V 1 PH 60 HZOptional 575V 3 PH 50 HZAll Are Phase EqualizeCONTROLS U.S. manufacturedNEMA 4 ratedCable transducer (sensor)Square D and Allen-Bradley Components2 HP TEFC MotorPCB Micro Processor With Cable Transducer MonitorsIndividual Column Position and Controls EachCARRIAGE BEARINGS UHMWPENo lubrication requiredLifetime guaranteeADDITIONAL SPECIFICATIONS NUMBER OF COLUMNS : 4 (and expandable)
COLUMN TURNING RADIUS : 43"
MOTOR : 2 HP (each column)
OVERALL HEIGHT : 115.5"
OVERALL WIDTH : 45.5"
OVERALL LENGTH : 43"
LIFT : 69"
SPEED OF LIFT (TO FULL TRAVEL) : 60 secondsINTERCONNECTING CABLE : 50ft. Polyurethane OSHA Orange UL 201 Certified, gas, oil SAFETY SYSTEM : Single point, continuously engaged, electrically operated safety device in each columnJACKING UNIT : Heavy duty jack, 3 position control for ease of mobility (unloaded)TIRE CRADLE SIZE : R22.5 to R17 Lift includes adapter for small diameter wheels. (Special pickup forks available for larger wheels.)BASIC OPERATING : 1 control column is capable of operating any combination of columns. (2/4/6/8/10/12 or more)OPERATING MODE-SYSTEM : All columns can operate from any column in the setMANUAL (MAINTENANCE) : Each column will operate independent of others from it's own control panel.PAIRED : Any column in paired mode will operate simultaneously with any other column in paired mode independent of other columns in the set.CONTROL PANEL LED'S : Give visual confirmation of the operational status of each column.ACCESSORIES (optional) Custom design cross beams and lifting forks for frame engagement are available on request and designed for your specific requirements - 36,000lbs. capacityHeavy duty mobile jack stands model MJS-18 with 18,000lbs. capacity each (set of 4-72,OOOIbs.) can be used to support one vehicle while the WE-18 is used to lift another.WARRANTY : 5 year parts (structural) 1 year (electrical) and 1 year labor (Lifetime on carriage bearings) |
